Skip to Content

How to Make Your Own Modern Canvas Art

It’s easy to create your own modern canvas with iron-on vinyl lettering and paint. Your favorite quote will add modern flare to any room in your home.

Image collage

Last week was the big reveal of our Modern Master Bathroom renovation. Ever since the reveal, I’ve been getting questions about this modern canvas art piece. Mostly, “Can I ask where you bought that?” Well, my friends, it’s a DIY! Almost all of the art in my home is handmade (and I’m getting better and better at it!).

Bathroom remodel with modern canvas art

This canvas was made using my Cricut Explore Air™ 2 machine. It’s a cutting machine that people typically think is used for paper crafts, but I’ve used it for a ton of home décor projects including wooden signs, etched vases, and coasters.

You can find more great Cricut projects in my Cricut Project Gallery.

Canvas to create the modern canvas art

Here’s what you need to make this typography art: 

Cricut Explore Air™ 2 machine
Black Paint (Coal Black)
Iron-on white vinyl
Light Grip Cricut Mat
Iron
18″ x24″ Canvas

Creating the design in Cricut Design Space for the modern canvas art

If you want to use the same text as me, you can open my Cricut canvas HERE and save it to your own computer.

Turning the mirror image on for Cricut Design Space

When you go to print the words, you need to check the box that says “Mirror Image”. This will cut a mirror image of your words so that you can iron them on.

Loading the vinyl into the cricut machine

Place the iron-on vinyl on your light grip cutting mat, with the shiny side down. You don’t want the Cricut to cut through the protective shiny layer. Then set your Cricut to “iron-on vinyl” and cut.

Cutting the design for the modern canvas art with the cricut machine

After your cut it done, you can remove the negative vinyl so that only the words are left. They will still be sitting on that protective shiny layer.  I used scissors at this point to cut the plastic into four separate pieces (one for each line of wording).

Design for the modern canvas art weeded on a cricut mat

I painted my entire canvas my favorite deep black color (it needed a couple of coats). And when it was ready, I used a ruler to line up my vinyl letters. I tried to get the same spacing between all of the words (about 1.5″).

Applying the vinyl to the canvas
Using an iron to transfer vinyl onto the canvas

Once I was happy with the placement, I used an iron on the “No Steam” setting to press on the vinyl. The clear layer is there is protect and transfer the vinyl. If you use the iron directly on the vinyl, without the clear layer, it could melt and distort the vinyl, so you need to be careful to only apply heat where there is a protective layer.

Removing the plastic transfer sheet from the vinyl

The heat will separate the vinyl from the protective layer, and you will be able to just peel it back once the vinyl has set. If you find you are pulling vinyl up, just put it back down and apply a bit more heat.

You don’t have to frame the canvas, but if you want to frame your own canvas, it’s super easy, and I’ll show you how!

Here’s what you need to frame the canvas: 

Pine Board cut into 3/4″ square pieces
Wood Glue
Speed Square
Table Saw
Miter Saw
Cordless Nailer

I don’t have a picture of the pine board being cut, because we had scraps of 3/4″ square pieces, but the first step is to cut your 3/4″ pine board into square strips, longer than the length of your canvas.

Cutting the frame for the modern canvas art with a miter saw

Next, you want to measure your canvas sides. Even though it says it’s 18″, it might be 18.5″ or something because of the wrapping. When you know the length, add 1.5″(3/4″ times two because your board is 3/4″ and you are adding board to both sides) to that (so 18.5″ length becomes 20″ length on the long side). Measure this distance and cut a 45 degree angle on the mitre saw (photo above). Flip the wood around and do the same thing on the other side (in my example, the long edge would be 20″, and the short edge 18.5″ when you are done).

Connecting the corners of the frame

Use a speed square to make sure that your angles are correct.

Gluing the frame together for the modern canvas art

Add wood glue to the edges, then line them up with the speed square again and using a nailer to nail them in place

Using a nail gun to nail the frame into place

Once the wood glue is dry, you can pop the canvas in place and use the nailer to nail the frame to the canvas.

Close up image of the modern canvas art

This is exactly what I wanted for our bathroom – it’s so easy to make your own home decor!

Modern canvas art displayed in a renovated bathroom
Renovated bathroom with modern canvas art
Renovated bathroom

If you like making your own artwork, check out this Painted Canvas Tutorial that you can make in less than an hour!

Painted modern canvas art displayed in a bedroom

Image collage with text overlay

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.

35 Inspiring Projects by Cricut Makers - Lydi Out Loud

Tuesday 22nd of October 2019

[…] Love Create Celebrate […]

Home Decor Ideas with the Cricut - Hey, Let's Make Stuff

Thursday 22nd of August 2019

[…] your day going with this motivational modern canvas wall art from lovecreatecelebrate.com. Find the perfect place in your home to hang […]

Kimberly Nielsen

Tuesday 29th of January 2019

Can I use this machine to make my own 5D diamond paintings on Canvas?

Fun & Creative DIY Cricut Projects - Not Just Stencils

Tuesday 19th of December 2017

[…] How To Make Your Own Modern Canvas Art from lovecreatecelebrate.com […]

Samantha

Sunday 9th of July 2017

This is super awesome!!! What a great motto and the black and white makes a power statement too! Love it Lindi!